Monday, 27 April 2009
Thursday, 23 April 2009
I've used hand-dyed felt and wadding for the main fabrics (two layers for the shoes) and bonded print fabric to tissutex for the wallpaper. The whole thing's machine stitched and quilted, with fancy yarn couched with a zigzag stitch round the edge. The wallpaper is 3D which I haven't done much of before.
The April one celebrated (if that's the word) minor surgery to remove a distorted and ingrowing toenail. I'd been told to sit with my foot up (I'd managed to steal the footstool back from Pepper when he wasn't looking) and was beginning to get bored (why is it than I can sit for ages doing nothing if there are things I really ought to be doing, but the moment I get told I have to do nothing I get restless and want to be doing things?). Turning over ideas for a journal quilt, I realised that the foot with the bandaged toe was pretty well the right shape for a JQ, so out with the sketchbook.
The first version was too close for comfort and rather too gruesome (especially after I'd stitched through the edge of my finger sewing the bandage on and got real blood on it):
So I decided something less realistic was needed, and came up with the idea of a blue foot. The actual foot for this one started not from the sketch but from me drawing round my foot and I think I had the pencil leaning in slightly, hence the elongated shape, emphasised by the fact I gor the ankle in the wrong place:
This one was pretty straightforward to make: the print fabric based on Gaudi seemed to work well with the shape, giving it a slightly art deco feel, and the spirals on the blue fabric seemed to go along with this. Straightforward fused applique, edges with satin stitch, and with details drawn in freehand using a triple (stretch fabric) stitch which gives a chunky line. Plus pale blue scrim folded and stitched for the bandage. All finished with satin stitch edging - all a great improvement on earlier attempts at satin stitching.
The first group of four together look like this:
Tuesday, 14 April 2009
The next stage is to decide how to divide up the surface of the quilt. I like asymmetry (it also helps to make a very simple design look more interesting/complex). There are many ways of producing a sort of balanced asymmetry (of which more in a later post) but a useful one to start with is to divide into approximate thirds, which will give you a vertical division of between 3 and 4 inches.
Cut an oblong of one of your more interesting fabrics in the chosen width or a little wider (plus half an inch for seam allowances) for your narrower section and a length somewhere in the region of two thirds of the length of the finished piece (don't worry about exact - approximately eight inches works well) plus half an inch seam allowance. Add on narrow strips of fabrics that blend or pick up individual colours (small prints, solids or less defined patterns are useful for this) until you reach 11 5/8 inches (or a bit more - it can always be trimmed back later): stitch together using a quarter-inch seam allowance.
For the larger section cut one or two pieces of more interesting fabric the size you want, plus narrower strips of toning or contrasting fabrics. Join together to match the length of your first fabric strip.
Decide how you want to arrange your two strips of fabric, and whether they need a further strip down the middle ot not. Press each strip, pressing seams to one side, going one way on one strip and the other way on the other. Either join your two strips of fabric together as they are, or join to a vertical strip. Press again.
Cut a fabric backing slightly larger than a piece of A4 paper, plus a piece of wadding the same size. Lay your Little Gem on top, and then either pin or stick the layers together using a spray fabric adhesive such as 505. Quilt in any way you like. Free-machining is good but if you feel nervous about that, straight or gently-curved lines with a normal foot is fine too.
Place your Little Gem on a cutting-mat and place an A4 piece of paper on top parallel to the edges. Using the paper as a guide, placing the ruler on the paper and lined up along the edge of it, cut to trim to size. Make sure the paper is lined up on the cut edge(s) before cutting each side in this way. If you don't have a rotary cutter you can pin the paper to the Little Gem and cut round the edge of the paper with scissors.
Finally bind the edges (see Little Gems website for links to sites telling you how to do this).
Have fun with it - it's a great way of experimenting with fabric-combinations!
Thursday, 9 April 2009
I had planned to make a few to send, but I ended up getting hooked. First two I made earlier - my first attempts at doing "arty" quilting a couple of years ago:
Next, one I made last summer, one of several on the theme of bubbles: this one has been cut down from a slightly larger piece, and is cut back applique with free machine quilting:
Together with friend Chris, I'm working on a session on Little Gems for my local quilt group, Night Owl Quiltmakers, in Leeds and thought I ought to try and expand the range of Little Gems that I had. The first uses a collection of quirky folk-art cat fabrics I have in my stash and is simply a collection of squares of different sizes:Next I experimented with free-pieced squares and oblongs from my hand-dyed fabric stash:
And next, strip-pieced base with fused applique, attached with free-machine stitching and FM quilted: